PRS Store

Hikvision Plug & Play MinMoe Temperature-Screening Terminal and Stand

PRS1029384
£2,720.00
In stock
1
Product Details

The Hikvision MinMoe Temperature-Screening Terminal with an integrated stand is an access control instrument capable of face recognition and temperature screening. It can also be connected to a card reader (NOT included) to enable card recognition.

The MinMoe Temperature-Screening Terminal can be set to one of three authentication modes:

  • Face recognition and temperature screening
  • Card recognition and temperature screening
  • Face recognition, card recognition and temperature screening

The terminal can be used to protect persons in stations, dwellings, factories, businesses, schools and campuses from unauthorised access and further spread of infection.

Practical, Plug & Play Design

The Hikvision MinMoe Temperature-Screening Terminal is comprised of a 10.1-inch LCD display with adjustable brightness and a stand bracket. These components are integrated and supplied ready-assembled. The terminal can be set up within five minutes as it is free of wiring, installation and configuration. It features a watchdog design optimised to protect the access control device and ensure that it is operating correctly. For a quick introduction to the MinMoe, please see the following video.


Furthermore, to enable face recognition and temperature screening, the unit is equipped with 2MP wide-angle lens and a Vanadium Oxide uncooled sensor for temperature measurement. It also features a high-performance processor with a deep learning algorithm, as well as an IO output and Wiegand for communicating with third-party turnstiles.

Temperature Screening

The MinMoe Temperature-Screening Terminal is optimised for conducting fast skin-surface temperature measurements. It will conduct skin-temperature screening upon detection of a human face and does not require identity authentication. It is able to measure temperatures between 30°C and 45°C to an accuracy ±0.5°C.*

Temperature measurements are displayed on the authentication page. The terminal will issue a voice prompt when an abnormal temperature is detected. It is also possible to configure the unit door status to open or close when an anomalous skin temperature is measured.

Online and offline temperature measurements are transferred to the client’s software via TCP/IP communication. Data is saved to the client’s software.

Face Recognition

The Hikvision MinMoe Temperature-Screening Terminal can also be used to grant or deny authentication/ building or room access depending on facial recognition. It will issue an audio prompt depending on the authentication result

The terminal has the capacity to store up to 50 000 recognised faces as well as up to 100 000 events. It is 99% accurate when recognising faces** and is able to determine face recognition within 0.2s per person. Individuals should stand between 0.3 and 2m away from the unit during this process.

The Hikvision MinMoe Temperature-Screening Terminal will transfer and save face recognition comparison results and captured pictures to the user’s software.

Face Mask Alerts

In addition to identifying recognised faces, the terminal can assess whether these individuals are wearing a face mask. The unit includes two face mask alerts allowing the user to adapt the terminal to suit the premises’ policies:

  • Face Mask Wearing Alert: if the recognised face is not wearing a face mask, the Hikvision MinMoe Temperature-Screening Terminal will issue a voice reminder while granting authentication/ access to the building or room.
  • Forced Mask Wearing Alert: if the recognised face is not wearing a mask, the Hikvision MinMoe Temperature-Screening Terminal will issue a voice alert while denying authentication/ access to the room or building.

Attendance Monitoring

Further to the above, the terminal can be used to monitor attendance and is able to log check-in, check-out, break-in, break-out, overtime-in and overtime-out times.

To ensure accurate timekeeping, the unit supports NTP, manual and automatic time synchronisation.

The Hikvision MinMoe Temperature-Screening Terminal is a rapid deployment access control and temperature-screening instrument suitable for security and temperature-screening applications.

Hikvision MinMoe Temperature-Screening Terminal Key Features

  • An access control instrument capable of face recognition and temperature screening
  • Includes two face mask alerts
  • Can be connected to a card reader (NOT included) to enable card recognition
  • Three authentication modes: face recognition and temperature-screening, card-recognition and temperature-screening, face recognition, card recognition and temperature-screening
  • Suitable for use in stations, dwellings, factories, businesses, schools and campuses
  • Can be used to prevent unauthorised access and further spread of infection
  • 10.1-inch LCD with an integrated stand
  • Adjustable brightness
  • Supplied ready-assembled
  • Can be set up within five minutes: free of wiring, installation and configuration
  • Watchdog design
  • 2MP wide-angle lens
  • Vanadium Oxide uncooled sensor for measuring temperature
  • High-performance processor with a deep learning algorithm
  • IO output
  • Wiegand for communicating with third-party turnstiles
  • Begins temperature-screening upon detection of a human face
  • ID authentication is not required to begin temperature screening
  • Temperature range: 30°C to 45°C
  • Accuracy: ±0.5°C*
  • Temperatures are displayed on the authentication page
  • Issues a voice prompt when an abnormal temperature is detected
  • The door status can be configured to open or close when an abnormal temperature is detected
  • Online and offline temperature measurements are sent to the user’s software via TCP/ IP communication
  • Temperature data is saved to the client’s software
  • Can store up to 50 000 recognised faces and 100 000 events
  • Face recognition accuracy: 99%
  • Can determine face recognition within 0.2s per person
  • Recognition distance: 0.3m to 2m
  • Issues a specific audio prompt depending on the authentication result
  • Transfers and saves face recognition comparison results and captured photos to the user’s software
  • Face Mask Wearing Alert: if the recognised face is not wearing a face mask, the terminal will issue a voice reminder while granting authentication/ access to the building or room
  • Forced Mask Wearing Alert: if the recognised face is not wearing a mask, the terminal will issue a voice alert while denying authentication/ access to the room or building
  • Monitor attendance: log check-in, check-out, break-in, break-out, overtime-in and overtime-out times
  • Supports NTP, manual and automatic time synchronisation
  • A rapid deployment access control and temperature-screening instrument
  • Suitable for security and temperature-screening applications

*To achieve this accuracy, the Hikvision DS-K5604A-3XF/V Plug & Play MinMoe Temperature-Screening Terminal should be switched on and left to warm up for ninety minutes.

**Biometric recognition products are not 100% suitable for anti-spoofing environments. Multiple authentication modes should be used for applications requiring a higher level of security.

What’s Included?

  • Hikvision DS-K5604A-3XF/V Plug & Play MinMoe Temperature-Screening Terminal with Integrated Stand
Save this product for later
Temperature Screening Solutions
FInd Out More
Mobile Services
Find Out More
Business Systems
Find Out More
Telematics
Find Out More
Previous slide
Next slide